4. Installation
Plug in the SMPS power supplies into the Power Module 19inch.
Never push objects of any kind into the power supply slots as they may touch dangerous voltage points or
short out parts that could result in a risk of fire or electrical shock.
The SMPS power supplies is a 800 W (or 1200W, respectively) (nominal) AC to DC power-factor-corrected power
supply unit that converts standard AC mains power into DC output and can be used in hot-swap redundant sys-
tems.
The power units are pushed into the Power Module 19inch. For locking the 800W power supply, fix the respec-
tive screw:
SMPS power supply 800W
SMPS power supply 1200W
Please note:
Once plugged into the Power Module 19inch, the SMPS power bricks are locked and need to be unlocked before
removal!
SMPS power supply 800W
SMPS power supply 1200W
Unlock the screw, push the lash to the right,
and then pull out the power unit.
Use a screw driver and press the yellow lock down.
Subsequently open the lock on the left and on the right and pull
out the power unit.
Mount the Power Module 19inch into a 19inch rack. Make sure that there is 1U free space above the Power
Modules 19inch: Mount the blind cover!!
Barco – Green BCM Solution – R591346 – user's manual – Revision 04– November-2016
____________________________________________________________________
31
