4. Installation
4
Installation
4.1
Installing Green BCM Box and the Green Power Switches (AC power supply)
Green BCM Box has been constructed for use in enclosed rooms. It should not be exposed to any excessive cold-
ness, heat, dampness, or dirtiness. For safety reasons, the environmental conditions indicated in the ‘Technical
Data’ must be observed.
Do not forget that the temperature inside a cabinet may be well above that of the temperature outside. It is
possible to improve conditions by arranging the components accordingly. One should by all means make sure
that once assembled, the specified temperature limit is not exceeded.
Please make sure that there is sufficient room for the connections, and that there are no protruding sharp edges.
Such edges could damage the connection cables, which in turn would affect the function and safety.
If the OVD/KVD/IVD/HVD displays run with AC power modules, the Green Power Switch Boxes (2) and the Green
BCM Box (1) and the Green OnOFF button are mounted to a DIN Rail. The picture shows the arrangement for a
display wall consisting of 6 displays.A
However the Green BCM Box can be installed and located anywhere, provided the ambient conditions are met
and provided the LAN cables and control cables are sufficient in length.
Barco – Green BCM Solution – R591346 – user's manual – Revision 04– November-2016
____________________________________________________________________
27
