3. Components of the Green BCM Solution
3.1.1
Position and function of the control elements on the front
POWER LED
When Green BCM Box is up and running, the green power LED is on.
Interfaces CLIENT, IR IN, PUSH BUTTON CONTROL IN
These interfaces are used by Green BCM Box as switch controller:
Green BCM Box can bring the display wall in ON/STANDBY mode by any of the following controls:
•
Command on the Green BCM web page (interface labeled CLIENT)
•
IR
•
Green ONOFF button (interface labeled PUSH BUTTON CONTROL IN)
Interfaces WALL, CLIENT
These interfaces are used by Green BCM Box as wall router running Barco Wall Control Manager service:
Green BCM Box is operated via LAN and controls the displays also via LAN. Therefore the LAN interfaces Wall and
Client are required for operating Green BCM Box as wall router.
Interfaces USB1, USB2, (HDMI)
The device does not require to be connected to a keyboard and a monitor. It can be configured remotely using a
web browser. Please refer to the user manual of Barco Wall Control Manager Software.
The HDMI interface is for servicing only!
For Firmware upgrade of the Green BCM Box
use the USB2 interface only!!
Pour la mise à niveau du micrologiciel de
la BCM Green Box utiliser l'interface USB2
seulement !!
Interface CONTROL OUT
Used to connect to CONTROL IN of the first Green Power Switch in the chain, cf.
Barco – Green BCM Solution – R591346 – user's manual – Revision 04– November-2016
____________________________________________________________________
20
