![background image](http://html1.mh-extra.com/html/barco/ov-708/ov-708_installation-manual_3831844008.webp)
1. Introduction
Barco - OV-708/OV-713/OV-715– R59770137 – installation manual – revision 01– September 2007
________________________________________________________
3
1.2
Safety
Instruction
This section describes safety precautions, which must be observed when installing and operating a product from
BARCO.
1.2.1
Standards
Safety Regulations
The equipment is built in accordance with the requirements of the international safety standard IEC950, UL1950
and CSA C22.2 No. 950, which are the safety standards of information technology equipment including electrical
business equipment.
The safety standards of information technology equipment impose important requirements on the use of safety
critical components, materials and isolation, in ord er to protect the user or operator against the risk of electric
shock and energy hazard, and having access to live parts.
Safety standards also impose limits to the internal and external temperature rises, radiation levels, mechanical
stability and strength, enclosure construction and protection against risk of fire.
Simulated single fault condition testing ensures the safety of the equipment to the use even when the
equipment’s normal operation fails.
1.2.2
General safety instructions
•
All the safety and operating instructions should be read before using this unit.
•
The operating instruction manual should be retained for future reference.
•
All warnings on the device and in the documentation manuals should be adhered to.
•
All instructions for operating and use of this equipment must be followed precisely.
1.2.3
Installation
Installation and preliminary adjustments should be performed by qualified BARCO personnel or authorized BARCO
service dealers.
1.2.3.1
Power Connection
This product should be operated from an AC power source. Power input is auto ranging from 100V to 240V.
Check the power rating on your outlet before connecting the devices to the wall outlet or
to a power strip. Contact your facilities manager or a qualified electrician if you are not
sure what type of power is supplied to your building.
All equipment in the system is equipped with a 3-wire grounding plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the
plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the
grounding-type plug.
The devices are designed to operate with single-phase power systems having a grounded
neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of
power system.
Use only the power cord supplied with your device. While appearing to be similar, other power cords have not
been safety tested at the factory and may not be used to power the projector. For a replacement power cord,
contact your dealer.
If an extension cord is used with this product, make sure that the total of the ampere ratings on the products
plugged into the extension cord does not exceed the extension cord ampere rating.
Содержание OV-708
Страница 1: ...Installation manual OV 708 OV 713 OV 715 R59770137...
Страница 15: ......