Barco OV-708, Руководство по установке

Страница: 57 / 78

Installation
Barco - OV-708/OV-713/OV-715– R59770137 – installation manual – revision 01– September 2007 ________________________________
________________________________ ________________________________ _______________________________________________ _______________ _______________ _______________ 52
5.19 Installation of the illumination unit
Step 66
Seen from front, the illumination unit is located at
the right side.
The illumination unit houses the two lamps and the
filter cartrid ge as well as control elements and the
LCD to display system information.
The fixation facilities allow mounting the device into
4:3 systems and into 5:4 systems: Depending on the
height of the module, the bottom fixation of the
d evice uses the upper (SXGA systems) or the lower
(XGA, SXGA+) keyhole.
The engine support profile R855677 comes already
with the pins to hang on the illumination unit and the
screws.
Step 67
Remove the respective screws from the engine
support profile, hang the illumination unit onto the
pins and slid the screw of the rear bottom profile into
the keyhole.
Tighten the screws.