Barco OV-708, Руководство по установке

Страница: 14 / 78

Pre-Installation requirements
Barco - OV-708/OV-713/OV-715– R59770137 – installation manual – revision 01– September 2007
________________________________________________________
9
2.9 Maintenance Area
Behind the display wall a service area is required. This area has to be at least 750mm. Please note that there
may be laws concerning safety standards in your country which require having a larger service area!
All maintenance and service work is done from the rear of the system.
The display wall can have a linear or a curved arrangement. With a curved design, the individual systems are
built up with angled connection plates. The angle between two columns can be 0°, 3°, 5°, and 8°.
2.10 Built-in configuration
When the OV display wall is integrated in a wall, mind the following recommendations: Leave a gap of 100mm
around the screen. Make sure to take the distance from the lower screen edge to the floor into account (standard
1200mm)