Barco OV-708, Руководство по установке

Страница: 60 / 78

Installation
Barco - OV-708/OV-713/OV-715– R59770137 – installation manual – revision 01– September 2007 ________________________________
________________________________ ________________________________ _______________________________________________ _______________ _______________ _______________ 55
Step 69
Care for a close connection between illumination unit
and projection unit!
When the illumination unit and the projection unit of
all projection modules of a display wall are installed,
proceed with the cabling.
5.21 Finalizing the cabling
Step 70
Power:
Plug in the power cord to the IEC320 interface of the
illumination unit [1].
In case the d isplay mod ule is equipped with a Multi
Input Module:
Plug in the power cord to the IEC320 interface of the
Multi Input Module.
Use the cable included in the Multi Input Module to
connect the IEC320 interface [1] of the illumination
unit to the AC out interface of the Multi Input Module.
I2C Communication:
Plug the interconnection cable into the I2C interface
[2] of the illumination unit and of the projection unit
[I2C].
Digital sources are connected to DVI 1 IN and/or