Barco OV-708, Руководство по установке

Страница: 28 / 78

Installation
Barco - OV-708/OV-713/OV-715– R59770137 – installation manual – revision 01– September 2007 ________________________________
________________________________ ________________________________ _______________________________________________ _______________ _______________ _______________ 23
5.6 Fixation to the floor
Step 17
When all pedestals are setup, connected and leveled,
for security reason the system should be fixed to the
floor via its fixation bracket (one on the rear side,
one on the front side).
To perform this action it is required to remove the
corner bracket: otherwise you cannot apply the
security pin.
It might also be necessary to remove the floor
fixation bracket in order to drill the holes in the floor.
Step 18
(If necessary, remove the floor fixation bracket, d rill
the holes, re-mount the floor fixation bracket).
Fix the system to the floor!
Fixation material of the floor bracket to the concrete:
1xZYKON–anchor FZA 14x40 – M10/25 (zinc-plated
steel).
In case of false floor: make sure that the anchoring
fixation is done on the concrete!
When the fixation is done, the fixation bracket has to
be secured by the security pin.
Use a drill bit size 4.9mm to drill a hole in the profile
in the position of the security pin.
Force the security pin (size 5x32mm) into the hole.
Re-apply the corner bracket!