Barco Nio systems, Инструкция по установке и эксплуатации

Страница: 47 / 128

Software installation
Nio systems 47
Reinstalling drivers
You can install new drivers or reinstall existing drivers at any time by
using the Barco Set-up wizard on your Barco system CD-ROM, see
Installing the B
ARCO
M
ED
display controller drivers and software
on
page 44 of this manual.
Uninstalling the drivers and software
To un-install the B
ARCO
M
EDICAL
I
MAGING
D
ISPLAY
S
YSTEM
drivers, software or
documentation, please use the
Windows Add/Remove Programs
utility.
This can be found in the Windows Control Panel.
Note:
If you installed your
B
ARCO
M
EDICAL
I
MAGING
D
ISPLAY
S
YSTEM
drivers with
DualView enabled, the wizard may warn you that DualView must be
disabled before the drivers can be un-installed. This is normal, please
follow the prompts from the wizard.
Command line (Silent) Install of Drivers and Software
Specifying the silent install option causes most of the GUI associated
with the installer to disappear. A background progress window will still
be visible, but no user input will be required.
The silent install behavior is dictated by the
SETUP.INI
file. Each
application is allowed to have separate command-line parameters for
normal and silent installs.
To install the drivers and software silently, please follow the steps
below:
1.
Insert the B
ARCO
M
EDICAL
I
MAGING
D
ISPLAY
S
YSTEM
CD-ROM into your
CD/DVD drive. When the Barco Product Installation Wizard starts
click
“Cancel”
.
2.
Click the
Start
button in the task bar.
3.
Click
Run
.
4.
Click
Browse
and
a)
browse to the root directory of the B
ARCO
M
EDICAL
I
MAGING
D
ISPLAY
S
YSTEM
CD-ROM.