Barco Nio systems, Инструкция по установке и эксплуатации

Страница: 44 / 128

Software installation
44 Nio systems
Software installation
Installing the B
ARCO
M
ED
display controller drivers and software
Note:
The installation dialog will display in English if your operating
system’s language is not supported.
This process applies to the following versions of Windows:
• Windows 2000 Professional,
• Windows XP Professional,
• Windows Professional x64 Edition,
• Windows Server 2003, and
• Windows Server 2003 x64 Edition.
You will need to install the B
ARCO
M
EDICAL
I
MAGING
D
ISPLAY
S
YSTEM
drivers
and software in the following cases:
• After you have installed the display controller(s) for your
B
ARCO
M
EDICAL
I
MAGING
D
ISPLAY
S
YSTEM
in your system for the
first time.
• After you have reinstalled or upgraded your operating
system.
1.
Start your system. When the
Found New Hardware Wizard
comes
up, click
Cancel
. When the
System Settings Change
window asks
you to restart your computer, click
No
.
Put the Nio 2MP display panel in
landscape
position before
installing the software.
Put the Nio 3MP/5MP display panel in
portrait
position before
installing the software.
If you wish to change the panel orientation later, the image
orientation will adapt automatically to the panel orientation
after
rebooting the PC
.
Note:
Both displays connected to a single display controller must
have the same physical orientation and resolution in order to be
attached to the Windows desktop.
2.
Run the Barco Product Installation Wizard.