Barco Nio systems, Инструкция по установке и эксплуатации

Страница: 30 / 128

Display controller installation
30 Nio systems
Display controller installation
Caution: Wear a
grounded
, protective ESD strap during installation
or handling of the display controller. Electrostatic charges can
damage the display controller.
Prior to installing your BarcoMed N
IO
display controller(s) in your PC
please take a few minutes to familiarize yourself with both the display
controller(s) and the PCI slots in your computer.
Figure 3: The BarcoMed N
IO
display controller
Using the VGA capabilities of the BarcoMed N
IO
display controller
Prior to installing the BarcoMed N
IO
controller, decide if you are
going to use its on-board VGA capabilities. If you are, check the
setting of the Jumper at J-1 on the display controller (see
figure 4). By default, VGA should be enabled, on the top two
pins.