Barco Nio systems, Инструкция по установке и эксплуатации

Страница: 45 / 128

Software installation
Nio systems 45
The Barco Product Installation Wizard should start automatically
when you insert the Barco System CD-ROM into your CD drive
after
the operating system has started. If your CD drive’s auto-run is not
enabled or the Barco Product Installation Wizard does not start
automatically, you can run the Barco Product Installation Wizard
manually by following these steps:
a)
Click the
Start
button in the task bar.
b)
Click
Run
.
c)
Click
Browse
and browse to the root directory of the B
ARCO
M
EDICAL
I
MAGING
D
ISPLAY
S
YSTEM
CD-ROM and click on the file,
Setup.exe,
and click
Open
.
d)
Click
OK
.
or
a)
Browse to the root directory of the B
ARCO
M
EDICAL
I
MAGING
D
ISPLAY
S
YSTEM
CD-ROM and double click on the file,
Setup.exe
.
3.
Click
Next
on the Welcome page.
4.
Click
Next
on the Components to be installed page.
5.
Follow the wizard’s on-screen instructions to complete the
installation.
Note:
When the page shown in figure 20 appears you may either
click
Next
to accept the default settings or if you know the settings
required for your viewing application, you may select them now
and then click
Next
. You may change these settings later by using
the Barco pages of the
Windows Display Control Panel
.