![background image](http://html1.mh-extra.com/html/barco/encore-vpx/encore-vpx_installation-manual_3830692021.webp)
Encore VPx Installation Guide • 08-0311105-00 Rev 00
21
båÅçêÉ=smñ=fåëí~ää~íáçå=dìáÇÉ
Installation
Please note the following points regarding this configuration:
•
Processor #4 (VPx) receives DVI Program and Preview feeds from processors #1,
#2 and #3.
•
Using Processor #4, three PIPs are scaled and positioned to create the wide
screen Program display, and three more are scaled to create the Preview display.
Figure 7.
Wide Screen Program/Preview Monitor PIPs
•
Processor #4’s
Preview
output is routed to the display for viewing the combined
wide screen program/preview output.
•
Processor #4’s
Program
output is routed to an ImagePRO for scaling, and then to
an SDI or HD-SDI recorder.
In addition to the equipment listed in
Table 3
on page 18, you will also need the following
equipment for this setup:
Use the following steps to install an Encore system that includes a VPx, for a
combined wide screen program/preview display:
1. Software
Version
— Prior to connecting your VPx processor(s), ensure that
software version 1.22 (or higher) is installed in your Encore Controller. Refer to
Appendix C, “
Upgrading Software
” in the
Encore Presentation System User’s
Guide
for complete upgrade instructions.
2.
Follow all steps to install a
Wide Screen Application
, as outlined in the
“
Installing VPX in a Wide Screen Configuration
” section on page 17. You do
not need to install the six individual monitors for program and preview displays,
because you will be using
one
monitor instead.
Wide Screen
Program
Wide Screen
Preview
PIP 1A
PIP 2A
PIP 3A
PIP 1B
PIP 2B
PIP 3B
Table 4.
Equipment List, Additional Wide Screen Program/Preview Requirements
Qty.
Item
Note
1
VPx
Assigned as Video Processor #4
1
DVI or Analog Monitor
For wide screen program/preview display
1
Ethernet cable
Customer supplied
6
DVI interconnect cables
Inputs to video processor #4 (customer supplied)
2
Interconnect cables
Video processor #4 outputs (Analog, Video and/or DVI as required)
1
ImagePRO
Optional, for use as output scaler (customer supplied)
1
SDI or HD-SDI Video Recorder
Optional, to record combined wide screen output (customer supplied)