![background image](http://html1.mh-extra.com/html/barco/encore-vpx/encore-vpx_installation-manual_3830692009.webp)
Encore VPx Installation Guide • 08-0311105-00 Rev 00
9
båÅçêÉ=smñ=fåëí~ää~íáçå=dìáÇÉ
VPx Hardware
smñ=oÉ~ê=m~åÉä
The figure below illustrates the VPx
rear panel:
Figure 3.
VPx Rear Panel
Please note:
•
Connectors 1 through 10 are part of the VPx’s output board, and all output
connections are standard. All program and preview DVI output connectors are
digital only.
•
In a widescreen configuration, a VPx cannot function in a standalone manner, but
must always work
downstream
of a standard VP. Here, a VPx cannot be the first
processor in an Encore configuration.
•
In the special widescreen “preview” configuration, a VPx
can
be used as a
standalone destination that accepts DVI input signals only — but no other input
types are accepted, and no genlock circuitry is provided.
•
This guide does not provide connector pinouts. Refer to
Appendix A
in the
Encore Presentation System User’s Guide
for details.
Following are descriptions of each rear panel connector and section on the VPx.
1)
Preview Out DVI
One DVI connector is provided for
Digital Preview Output
.
2) Preview
Out
Analog
One 15-pin D connector is provided for
Analog Preview Output
.
ETHERNET
DVI
PREVIEW
ANALOG
Hol
es
ANALOG
PROGRAM 2
DVI
Hol
es
DVI
PROGRAM 1
ANALOG
Hol
es
HD / SDI
OUT
IN
PROGRAM LINK
DVI
INPUT 1A
DVI
INPUT 2A
DVI
INPUT 3A
DVI
INPUT 1B
DVI
INPUT 2B
DVI
INPUT 3B
OUT
IN
SOURCE LINK 1
OUT
IN
SOURCE LINK 2
OUT
IN
SOURCE LINK 3
SERIAL
1
UNIT ID
1
16
2
3
4
5
6
7
8
9
10
15
14
11
12
13
1)
Preview Out DVI
7)
Program Out HD/SDI
13)
M/E 3 Connectors
2)
Preview Out Analog
8)
Program Link Out
14)
Unit ID Selector
3)
Program 2 Out Analog
9)
Program Link In
15)
Serial Port
4)
Program 2 Out DVI
10)
Ethernet Port
16)
AC Connector
5)
Program 1 Out DVI
11)
M/E 1 Connectors
6)
Program 1 Out Analog
12)
M/E 2 Connectors