Encore VPx Installation Guide • 08-0311105-00 Rev 00
15
båÅçêÉ=smñ=fåëí~ää~íáçå=dìáÇÉ
Installation
fåëí~ää~íáçå
The following topics are discussed in this section:
•
Unpacking and Inspection
•
Site Preparation
•
Cable and Adapter Information
•
Rack-Mount Installation
•
Installing VPx
råé~ÅâáåÖ=~åÇ=fåëéÉÅíáçå=
Before opening the VPx box, inspect it for damage. If you find any damage, notify the
shipping carrier immediately for all claims. As you open the box, compare its contents
against the packing slip. If you find any shortages, contact your sales representative.
Once you have removed all the components from their packaging and checked that all the
components are present, visually inspect each unit to ensure there was no damage during
shipping. If there is damage, notify the shipping carrier immediately for all claims.
páíÉ=mêÉé~ê~íáçå=
The environment in which you install your VPx units should be clean, properly lit, free from
static, and have adequate power, ventilation, and space for all components.
`~ÄäÉ=~åÇ=^Ç~éíÉê=fåÑçêã~íáçå
The table below provides information regarding cables and adapters:
o~ÅâJjçìåí=fåëí~ää~íáçå
Encore VPx units are designed to be rack mounted, and are supplied with front rack-mount
hardware. Rear rack-mount brackets are available as a kit, and are recommended when
units are mounted in transit cases.
When rack mounting VPx units, remember the following important points:
•
Maximum ambient operating temperature for the unit is 40 degrees C.
•
Leave at least one inch of space (front and rear) to ensure that the airflow through
the fan and vent holes is not restricted.
Table 2.
VPx
cables and adapters
Quantity
Cable / Adapter
Description
1 M/E
2 M/E
3 M/E
Power (US)
18GA, 10A, 7.5 meter length
1
1
1
DVI-I Male to DVI-I Male
1 meter length
2
3
4
DVI Plug to VGA
Cable Adapter
2
4
4
