![background image](http://html1.mh-extra.com/html/barco/encore-vpx/encore-vpx_installation-manual_3830692017.webp)
Encore VPx Installation Guide • 08-0311105-00 Rev 00
17
båÅçêÉ=smñ=fåëí~ää~íáçå=dìáÇÉ
Installation
fåëí~ääáåÖ=smu=áå=~=táÇÉ=pÅêÉÉå=`çåÑáÖìê~íáçå
The figure below illustrates a block diagram of a “triple” wide screen configuration that
includes VPx. Use this diagram for reference in the following procedure. Please note:
•
Aux destinations are not shown in the diagram.
•
This procedure can be used for wide screen configurations consisting of from 2 to
32 screens. Horizontal, vertical, and “array” blending is set using the
Destination
Setup Menu
.
•
A VP must be used as the “master” processor. Thereafter, either a VP or a VPx
can be used.
•
Software version 1.22 (or higher) must be installed first in your Encore Controller,
prior to connecting your VPx processor(s).
Figure 5.
Block Diagram, Wide Screen Encore Configuration
PG 2
PVW
PG 1
Projector #1
Projector #2
Projector #3
Program #1
Program #2
Program #3
Preview #1
Preview #2
Preview #3
Controller SC or LC
VP #1
VP or VPx #2
Ethernet Switch
PG 2
PVW
PG 1
PG 2
PVW
PG 1
Scaled
Sources
Unscaled
Sources
M/E Inputs
Unscaled
Sources
Unscaled
Sources
Program
Link
VP or VPx #3
Source
Link
Program
Link
Source
Link
To:
Routers
ScreenPRO-II
PresentationPRO-II
ImagePRO
Note
: #1 is VP only, not VPx
Important
:
Software version 1.22 (or higher)
must be installed in the Controller .