Infrared Burner Lighting Instructions
Follow steps 1 through 5 of the Grill Lighting
Instructions.
Push and turn Control Knob to
Ingitor/HI. You will hear
a clicking sound as the burner is being ignited.
If ignition does not occur in 5 seconds, turn the Burner
Control(s) off, wait 5 minutes, and repeat the lighting
procedure. If ignition still does not occur, turn the
burner control(s) and gas source OFF. Wait 5 minutes
for gas to clear and then conduct a leak test of ALL gas
connections and gas sources as explained in the
Use and Care section of this manual. If no leaks are
detected, wait 5 minutes for any gas to clear and
repeat the lighting procedure.
After Burner is lit, turn the tank valve SLOWLY one
more 1/4 of a turn.
1.
4.
3.
2.
Manually Lighting Your Grill By Paper Match
20
To light your gas grill by match, insert a match into the
Lighting Stick and follow steps 1 through 5 of the Grill
Lighting Instructions to light the infrared burners. Then,
light the match and place Lighting Stick through the
Cooking Grids on the grill to light the main burners. Turn
the correlated Control Knob to the Ingitor/HI setting to
release gas. The Burner should light immediately.
OFF
LO
Ingitor/HI
