Barbeques Galore EDV27-BQ, Инструкция по использованию и уходу

Страница: 14 / 38

13
INSTALLER FINAL CHECKLIST:
GRILL BURNER FLAME HEIGHT:
To access the grill burner air shutters first remove
the valve panel by removing the four screws on the
corners of the valve panel. Remove the control
knobs. Pull the valve panel outward. With a screw
driver, loosen the lock-screw on the face of the air
shutter. Light the burner and adjust according to
the directions above. Access for the power burner
air shutters is through the top after removing the
top burner grate (See Fig. 09).
BURNER AIR ADJUSTMENT:
Each grill burner is tested and adjusted at the
factory prior to shipment; however, variations in the
local gas supply or a conversion from one gas to
another may make it necessary to adjust the
burners. The flames of the burners (except the
rotisserie burner) should be visually checked and
compared to that of the drawing in Fig.09. Flames
should be blue and stable with no yellow tips,
excessive noise or lifting. If any of these
conditions exist, check if the air shutter or burner
ports are blocked by dirt, debris, spider webs, etc.
Proceed with air shutter adjustment. The amount
of air which enters a burner is governed by a sheet
metal cup or disk at the inlet of the burner called
an air shutter. It is locked in place by a set screw
which must be loosened prior to lighting the burner
for adjustment.
❏
Specified clearances main-
tained to combustibles.
❏
Nylon straps removed from
burners.
❏
All internal packaging
removed.
❏
Knobs turn freely, bezels
centered.
❏
Each burner lights satisfa-
torily, individually or with
adjacent burner lit.
❏
Air shutters adjusted.
❏
Adjustable low setting satis-
factory.
❏
Drip pan in place properly
and sliding freely.
❏
Pressure regulator connected
and set for 4.0"W.C. Natural,
11.2" W.C. LP gas.
❏
Manual shut-off valve
installed and accessible.
❏
Unit tested and free of leaks.
❏
User informed of gas supply
shut-off valve location.
• PLEASE LEAVE THESE
INSTRUCTIONS WITH THE
USER.
• USER, PLEASE RETAIN
THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
1
1/2
"
3/8
"
FIG. 09
Burner Flame Height
Installer Checklist/Burner Adjustments
Air Shutter