Barbeques Galore EDV27-BQ, Инструкция по использованию и уходу

Страница: 20 / 38

19
TO LIGHT THE ROTISSERIE BURNER
(BQR AND BQAR MODELS ONLY):
The location of the rotis burner makes it more
susceptible to strong wind conditions, more so than
the protected grill burners. For this reason you
should avoid operating the rotis during windy
conditions. As an added safety feature we’ve
equipped the burner with an automatic safety valve
which will not allow gas to flow to the rotis burner
unless the following conditions are present with the
knob on:
1. The safety valve button is pressed and
held down.
2. The safety valve thermocouple has been
sufficiently heated to keep safety valve
open.
Open the lid. Push and hold the ignition button.
You’ll hear a snapping sound. Turn the control
knob to ‘HI’. Engage the safety valve button and
continue to hold until the burner is lit. Once lit, turn
control knob to desired setting. If the burner does
not light within 4 to 5 seconds, release the safety
valve button and turn the control knob to “OFF”
and wait 5 minutes before trying again.
• If relighting a hot burner, wait 5 minutes.
• Never leave the control knob on if rotis is
not in use.
• Never light a grill burner under the rotis,
while rotisserie burner is lit.
MANUAL LIGHTING:
To manually light the rotisserie, place a butane
lighter near the tip of the thermocouple as shown in
Fig. 13. Turn the control knob to “HI”. Hold the
safety valve button in for about 4 to 5 seconds or
until the burner remains lit. Once lit, turn control
knob to desired setting. If the burner does not light
within 4 or 5 seconds, release the safety valve
button and turn the control knob to “OFF” and wait
5 minutes before trying again.
thermocouple
Using The Rotisserie
WARNING: Keep hands and face away
from front of burner! Stand to the
side when lighting. Once lit move
hand away quickly.
WARNING: Electrical Grounding
Instructions: This appliance (rotisserie
motor) is equipped with a three-prong
(grounding) plug for your protection
against shock hazard and should be
plugged directly into a properly
grounded three-prong receptacle. Do
not cut or remove the grounding prong
from this plug.
The Rotisserie motor must be
electrically grounded in accordance with
local codes or, in the absence of local
codes, with the National Electrical
Code, ANSI/NFPA 70-1990. Keep the
rotis motor electric cord away from the
heated surfaces of the grill. When not in
use, remove and store the motor in a
dry location.
FIG. 13