Barbeques Galore EDV27-BQ, Инструкция по использованию и уходу

Страница: 15 / 38

14
WARNING: IMPORTANT!
Before
lighting, inspect the gas supply
piping or hose prior to turning the
gas "on". If there is evidence of
cuts, wear, or abrasion, it must be
replaced prior to use.
TO ADJUST:
1. Be careful as the burner may be very hot.
2. If the flame is yellow, indicating insufficient
air, turn the air shutter counterclockwise to
allow more air to the burner.
3. If the flame is noisy and tends to lift away
from the burner, indicating too much air, turn
the air shutter clockwise.
4. Once adjusted turn the burner off and
reverse steps to reassemble.
LOW SETTING ADJUSTMENTS:
The valves on the grill feature an adjustable low
setting. Due to fluctuations in gas pressure,
heating value or gas conversion, you may feel it
necessary to increase or decrease gas flow in the
low position. We do not recommend adjusting the
infrared rotis burner.
TO ADJUST:
1. Light the burner.
2. Turn the control knob to the lowest setting
(all the way counter-clockwise).
3. Remove the knob.
4. While holding the valve shaft with pliers,
insert a thin, flat tipped screwdriver into the
shaft and while viewing the burner adjust to
a minimum stable flame (Fig. 10).
GRILL:
Each grill section consists of a large stainless steel
burner, a series of stainless steel heat baffles, a
series of pyramid rocks encased in a stainless steel
rack, and a stainless steel heat retaining cooking
rack. Each burner is rated at 20,000 Btu/hr. Below
each burner is a stainless steel heat baffle which
reflects usable heat upward into the cooking area
and reduces temperatures of the drip pan below.
Above the burners are stainless steel radiants
which encase the ceramic tubes and protect the
grill burner ports from blockage.
Burner Adjustments / Using The Grill
FIG. 10
Low Setting Adjustment
Bezel
Valve Stem