Barbeques Galore EDV27-BQ, Инструкция по использованию и уходу

Страница: 9 / 38

8
INSULATED JACKET:
Do not build the Grill under overhead unprotected
combustible construction. If the Grill is to be
placed into a combustible enclosure, an approved
insulated jacket is necessary and is available from
your dealer. Use only the insulated jacket which
has specifically been designed and tested for this
purpose.
LOCATION:
When determining a suitable location take into
account concerns such as exposure to wind,
proximity to traffic paths and keeping any gas or
electrical supply lines as short as possible. Locate
the grill only in a well ventilated area. Never locate
the grill in a building, garage, breezeway, shed or
other such enclosed areas without an approved
ventilation system. During heavy use, the grill will
produce a lot of smoke. Ensure there is adequate
area for it to dissipate.
IMPORTANT:
Gas fittings, regulator,
and installer supplied shut-off valves
must be easily accessible.
Locating Grill / Built-In Clearances
CLEARANCES TO COMBUSTIBLE
CONSTRUCTION:
A Minimum of 12" from the sides and a minimum
of 12" from the back must be maintained from the
Grill above and below the cooking surface to
adjacent vertical combustible construction.
CLEARANCES TO NON-COMBUSTIBLE
CONSTRUCTION:
A minimum of 3" clearance from the back of the
grill to non-combustible construction is required for
the purpose of allowing the lid to open fully. It is
desirable to allow at least 6" side clearance to non-
combustible construction above the cooking
surface for counter space. If you’ll be using the
rotisserie option, the space is essential for motor
and skewer clearance. The Grill can be placed
directly adjacent to non-combustible construction
below the cooking surface.