17
MANUAL LIGHTING:
If the burner will not light after several attempts
then the burner can be manually lit. If you’ve just
attempted to light the burner with the igniter, allow
5 minutes for any accumulated gas to dissipate.
Keep your face and hands as far away from the
grill as possible and hold and pass a lit match or
butane lighter over the hole located on the top left
for burner on the left, or the right hole for the right
burner (see Fig.11). Push and turn the control
knob which is centered on the burner that you
intend to light to “HI”. If the burner does not light
in 4 seconds turn the knob off, wait 5 minutes
and try again. Once the left or right burner is lit,
the adjacent burner(s) can be lit by the cross-
lighting method. For center burners to cross
light, light the adjacent far left or right burner
using the standard or manual light procedure.
Push and turn the control knob for the desired
center burner to “HI”; the gas will be ignited by
the adjacent burners flame. If the burner does
not light in 4 seconds, turn knob off, wait 5
minutes and try again.
Lighting Instructions
FIG.11
Содержание EDV27-BQ
