Barbeques Galore EDV27-BQ, Инструкция по использованию и уходу

Страница: 22 / 38

21
GRILL AND ORIFICE CLEANING:
Remove the grill racks, then lift out the grill radiant
tray. Grasp the burner, pull it up and slightly to the
rear of the unit so the burner head comes off the
brass orifice at the front, angle the burner
sideways, and remove.
Burner Cleaning
Clean the exterior of the burner with a wire brush.
Clear stubborn scale with a metal scraper. Clear
any clogged ports with a straightened paper clip.
Never use a wooden toothpick as it may break off
and clog the port. Shake out any debris through
the air shutter. Use a flashlight to inspect the
burner inlet to ensure it is not blocked. If
obstructions can be seen, use a metal wire coat
hanger that has been straightened out.
Orifice Cleaning
With the burner removed, remove the orifice and
shine a flashlight through the opening to ensure
there is no blockage. Use a needle to clear any
debris. Be extremely careful not to enlarge the
hole or break off the needle (see Fig. 15).
IT IS EXTREMELY IMPORTANT TO
CENTER THE BURNER ON THE ORIFICE
PROPERLY.
Be careful not to upset the air shutters’ original
position (unless readjusting). Lower the rear of the
burner into the cutouts on the support channel at
the rear of the burner box. Make sure it is level
and does not rock. Light all of the burners and
check for proper flame characteristics. If
adjustments are necessary, refer to page 13. Do
this prior to cooking on the grill.
Burner Removal And Cleaning
FIG. 15