Installation & Operating Instructions
|
Baracuda XA Robotic Pool Cleaner
23
4
REPLACING THE BRUSHES
Are the brushes worn?
Replace the brushes if
the wear indicators are
similar to example
Remove the tabs from the holes inside which they
are fastened, then remove the brushes.
Fit the side without tabs
under the brush holder.
Remove the worn brushes
Position the new brushes
Roll the brush around
its support, slide the
tabs into the attachment
holes and pull on the end
of each tab until its edge
passes through the slit.
Cut the tabs using a
pair of scissors for
them to be level with
the other blades.
1
2
3