16
Baracuda XA Robotic Pool Cleaner
| Installation & Operating Instructions
GOOD PRACTICES AFTER EACH
CLEANING OPERATION
• After each cleaning cycle, follow the steps for cleaning the filter, see
section regarding “Cleaning the filter".
2
Lay out the cable to reduce tangling.
• The appliance's behaviour is strongly impacted by the tangling of
the cable. A cable that is correctly untangled will guarantee better
coverage of the pool.
• Untangle the cable
and lay it out in the sun
so that it returns to its
original shape.
3
Store the cleaner and cable
1
Clean the filter as soon as the appliance is out of the pool
The cleaner’s performance may be reduced if the filter
is full or dirty.
Clean the filter in clean water as soon as the appliance is
removed from the pool after each cleaning cycle.
Do not wait for the debris to dry.
- Do not leave the appliance to dry out in sunlight after use.
- Store all the elements away from sunlight, humidity,
and bad weather.
- Screw the protective cap back on if you disconnect
the floating cable from the control box.
Place the cleaner vertically
at the location provided
on the trolley for it to dry
out quickly. Roll up the cable
carefully and place it on the
trolley handle. Store all elements
away from direct sunlight and
any splashes.
A protective cover is
available as an optional extra.
Even if you do
not own a trolley,
the cable must
still be carefully
arranged for
storage. Once
rolled up, the cable
can be placed on
a wall mount for
example.
