Installation & Operating Instructions
|
Baracuda XA Robotic Pool Cleaner
5
• The power supply to the appliance must be protected by a dedicated
30 mA Residual Current Device (RCD), complying with the standards
and regulations in force in the country in which it is installed.
• Do not use any extension lead when connecting the appliance; connect
the appliance directly to a suitable power supply.
• Before carrying out any operations, check that:
• The required input voltage indicated on the appliance information
plate corresponds to the mains voltage.
• The mains supply is compatible with the appliance's electricity
needs and is correctly grounded.
• In the event of abnormal operation or the release of odours from the
appliance, turn it off immediately, unplug it from its power supply and
contact a professional.
• Before servicing or performing maintenance on the appliance, check
that it is powered off and completely disconnected from the power
supply and that all other equipment or accessories connected to the
appliance are also disconnected from the power circuit.
• Do not disconnect and reconnect the appliance to the power supply
when in operation.
• Do not pull on the power cord to disconnect it from the power supply.
• If the power cord is damaged, it must be replaced by the manufacturer,
an authorised representative, or a repair facility only.
• Do not perform maintenance or servicing operations on the appliance
with wet hands or if the appliance is wet.
• Before connecting the appliance to the power supply, check that the
connection unit or socket to which the appliance will be connected is in
good condition and shows no signs of damage or rust.
• In stormy weather, disconnect the appliance from the power supply to
prevent it from suffering lightning damage.
WARNINGS ASSOCIATED WITH
ELECTRICAL APPLIANCES
