22
Baracuda XA Robotic Pool Cleaner
| Installation & Operating Instructions
To avoid serious injury:
• Disconnect the cleaner from the power supply.
• Wear gloves when maintaining the impeller.
Once cleaning is complete, reinsert the impeller and the filter
and tighten firmly.
3
CLEANING THE IMPELLER
Open the filter access hatch
by lifting the lock.
Remove the filter.
Insert a screwdriver into the holes and maintain right pressure to loosen
flow guide by turning the screwdriver in the anti-clockwise direction
(upon first removal, the flow guide is securely tightened)
Once the flow guide has been loosened, unscrew it by hand
Remove the flow guide
by lifting it.
Put on a pair of gloves
and pull the impeller,
holding it firmly to
take it out.
Remove any debris
(leaves, stones, etc.)
which may be blocking
the impeller.
1
3
4
5
6
7
2
