manualshive.com logo in svg

Banner SX5, Инструкция по эксплуатации

Поделиться
Скачать
Banner SX5 Скачать руководство пользователя страница 60

6.4.1 Main Menu

The following menu options are available.

File

New Configuration—Creates a new device configuration from scratch.
Open Configuration from PC—Opens a previously saved Configuration file.
Read from PC - Report—Shows a Safety System Configuration Report saved on the PC.
Save—Saves the current configuration or report to PC.
Exit—Exits SX5soft user interface.

Scanner

Discovery—Searches for a scanner connected to the Network (LAN).
Open Configuration from device—Opens the configuration already loaded on a scanner.
Apply Configuration—Transfers a configuration to a connected scanner.
Read from Device - Report—Shows a Safety System Configuration Report for Scanner's configuration.
Settings—Change Network Configuration, Change Access Controls, Reset Password.
Update Firmware—Updates the firmware file of the scanner.

Options

Change Language—Allows the user to change the display language used in SX5soft in real time. The selected
language will also be used for successive sessions.
Change GUI Log Level—Verbose, Information or Error (Information is the default setting).
Change GUI Log Options

Help

Laser Scanner Instruction Manual—Opens the SX5 Safety Laser Scanner Instruction Manual.
Zip GUI log
About—Opens a window that contains the SX5soft release version information.

6.4.2 Toolbar

Button

Name

Function

Home/Getting Started

Allows the user to start a session by returning to the home page (Task Selection menu page).

Save

Saves the current configuration or report session.

Configuration Validator

This tool allows checking the new configuration in SA5soft before sending it to the device. By
clicking on this icon, a validation test will be made on the entire configuration in SA5soft. A pop-
up window will appear displaying a list of configuration errors or validating the configuration.

Monitoring

Starts a monitoring session of the connected scanner.

Help Online

Displays a window that includes the help online guide and it shows the parameters depending
on the selected configuration step.

6.4.3 Status Bar

The status bar displays the status of four items (if a scanner is connected and selected).

• Communication status

SX5 Safety Laser Scanner

 

 

60

www.bannerengineering.com - Tel: +1.763.544.3164

 

Содержание SX5



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды