2.3 Fiber Adapters
Note: If a thin
fiber
with less than 2.2 mm outer diameter is used, install the
fiber
adapter provided with the
fiber
assembly to
ensure a reliable
fit
in the
fiber
holder. Align the
fibers
to the end of the adaptors. Banner includes the adapters with all
fiber
assemblies.
TO
FIBERS
TO
SENSOR
Fiber Outer Diameter (mm)
Adapter Color
Ø 1.0
Black
Ø 1.3
Red
Ø 2.2
No adapter needed
When
connecting
coaxial-type
fiber
assemblies to the
amplifier,
install the single-core (center)
fiber
to the
Transmitter
port, and the
multi-core
(outer)
fiber
to the Receiver port. This will result in the most reliable
detection.
TRANSMITTER
RECEIVER
Single-core fiber
Multi-core fiber
2.4 Wiring Diagrams
4
1
3
2
10-30V dc
CH1
CH2
+
–
PUSH-PULL
Load
Load
Figure 2. Channel 1 as a Push-Pull discrete output, Channel 2 as PNP
discrete output
4
1
3
2
10-30V dc
CH1
CH2
+
–
PUSH-PULL
Load
Remote
Input
Figure 3. Channel 1 as a Push-Pull discrete output, Channel 2 as remote
input
Key
1 = Brown
2 = White
3 = Blue
4 = Black
Note: Open lead wires must be connected to a terminal block.
Note: The Channel 2 wire
function
is user-selectable. The default is independent Light Operate (LO) PNP output. See the Remote Input
section
for details regarding use as remote input or the Sync Master/Slave
section
for use as a
synchronization
output.
DF-G2 High Speed Expert Dual Display Fiber
Amplifier
with Dual Discrete Outputs and IO Link
6
www.bannerengineering.com - Tel: 763.544.3164
