Method
Action
Result
SET
Button
•
Present sensing
condition
•
Click the SET rocker
button
Threshold
Condition
Accepted Displays
read "wInd SEt" then alternate "PASS"
with %
Offset
13; Sensor returns to Adjust
mode
Threshold
Condition
Not Accepted
Displays read "wInd SEt" then alternate
"FAIL" with minimum %
Offset
13 for
sensing
condition;
Sensor returns to Adjust
mode
Remote Input
•
Present sensing
condition
•
Single-pulse the remote input
T
3. Return to RUN Mode
Method
Action
Result
SET
Button
Move Mode switch to Run
Display: Red - Signal Level; Green - Window
Center (see
on page 17 for
instructions
on how to display upper and
lower thresholds)
Remote Input
No
action
required; sensor returns to Run
mode
automatically
Window SET (during RUN mode)
Upon sensor power-up, Window Center is displayed
Upper
Threshold
Displayed
Window
Center
Displayed
Lower
Threshold
Displayed
Figure 11. Upper and Lower Thresholds
Light SET
• Sets a threshold a programmable %
offset
below the presented
condition
• Changes output state on any
condition
darker than the threshold
condition
• Threshold can be adjusted using "+" and "-" rocker
button
(Manual Adjust)
• Recommended for
applications
where only one
condition
is known, for example a stable light background with varying darker
targets
• See Program Mode for programming the
Offset
Percent
setting
A single sensing
condition
is presented, and the sensor
positions
a threshold a programmable %
offset
below the presented
condition.
When a
condition
darker than the threshold is sensed, the output either turns ON or OFF, depending on the LO/DO
setting.
13 See
on page 21 for more
explanation
of the %
Offset
displayed
after
the Window SET method
DF-G2 High Speed Expert Dual Display Fiber
Amplifier
with Dual Discrete Outputs and IO Link
www.bannerengineering.com - Tel: 763.544.3164
17
