![background image](http://html1.mh-extra.com/html/bang-and-olufsen/beovision-12-65-mk-ii/beovision-12-65-mk-ii_installation-manual_3730928051.webp)
Scene setup
51
Additional timer settings
Additionally to the CONTROL TIMERS, the WARM UP TIME and COOL DOWN TIME must be set.
Note: The values must be equal to or higher than the highest of the CONTROL TIMER values set for CINEMA ON or CINEMA OFF respectively. If
that condition is not fulfilled, it will not be possible to store the entered values.
- Select the WARM UP TIME and the COOL DOWN TIME and press the
Centre
button to the right (increasing number) or left (decreasing number)
to set the timer to the time it takes for the Projector or television to warm up and is ready to open the “SW curtains in cinema mode” respectively
set the timer to the time it takes for the Projector or television to cool down; i.e. the time it takes from pressing Standby in projector mode and
until the system can be turned on again. The cool down time is as minimum 10 s.
Cinema On scenario - example
Cinema On (Turning On a BeoSystem 4 Projector Setup) - example
Projector
Warm up period
Warm Up period (given)
------------------------------------------------------------------------------------------------------------->
Displaying Picture
Drapes
Control Timer 1
Control Timer 1 (delay time 1)
Closing drapes ------------------------------------------------->
Projector Lift
Control Timer 2
Control Timer 2 (delay time 2)
Lowering projector lift --------------------------------------->
Projector Screen
Control Timer 3
Lowering screen (action) -------------------------------------------------------------> Control Timer 3 (delay time 3 = 0 s)
Light
Control Timer 4
Control Timer 4 (time)
Fading light ---->
BeoSystem 4
Warm up time
Warm up time -------------------------------------------------------------------------------------------------------------------------->
SW curtains ---->
Picture/Movie -->
T
0
condition is that the TV is in Quick Start mode or already On.
(If not, then the TV start up Time will be added)
Cinema Off scenario - example
Cinema Off (Shutting Off a Projector Setup) - example
Press Standby Ready for turning On again
BeoSystem 4
SW curtains closing
Cool down time ----------------------------------------------------------------------------------------------------------------------->
Projector
Cool down period
Cool down period (given) ----------------------------------------------------------------------------------------------------------->
Drapes
Control Timer 1
Opening drapes -----------------------------------------------------------------------> Control Timer 1 ( delay time 1 =0)
Projector Lift
Control Timer 2
Control Timer 2 (delay time 2)
Raising Projector Lift------------------------------------------>
Projector Screen
Control Timer 3
Control Timer 3 (delay time 3)
Raising screen--------------------------------------------------->
Light
Control Timer 4
Fade in light-----------------------------------------------------> Control Timer 4 (delay timer 4 = 0)
Lift scenario On - example
BeoVision 12-65 raised by a lift controlled by BeoSystem 4 - example
Press a video source button (e.g. TV)
BeoSystem 4
Lift done delay
Lift Done Delay time - Raising BeoVision 12-65 lift ----------------------------> SW Curtains opening ----------------> Displaying Picture
Drapes
Control Timer 1
Control Timer 1 (delay time 1
Closing drapes ------------------------->
Light
Control Timer 4
Control Timer 4 (delay timer 4)
Fade out light -->
Lift scenario Off - example
BeoVision 12-65 lowered by a lift controlled by BeoSystem 4 - example
Press Standby
BeoSystem 4
Lift Done delay
Displaying Picture
SW curtains closing ------------------------------------------->
Lift Done Delay - lowering BeoVision 12-65 lift -------->
Drapes
Control Timer 1
Opening drapes ----------------------------------------------------------------------->
Light
Control Timer 4
Control Timer 4 (delay timer 4)
Fade in light ---------------------------->