![background image](http://html1.mh-extra.com/html/bang-and-olufsen/beovision-12-65-mk-ii/beovision-12-65-mk-ii_installation-manual_3730928045.webp)
Customer Service Menu
45
SCENE SETUP
Activating this menu leads you to a subset of parameters that you can set up in connection with especially a projector setup. Menu’s will only be
shown for products supporting “Scene Setup”.
OPEN COLLECTORS SETUP
- Open Collectors requires external power supply and can either be stated in low or high impedance state (sinking current, not outputting a voltage
high or low).
There is a total of four Open Collectors (O/C) freely programmable for easy installation, meaning that the installer decide freely which physical O/C
is controlling what
The O/C are physically placed in the RJ45 Control Connectors (2 O/C’s in each of the two connectors named PUC1 A+B respectively PUC2 A+B)
In this menu you can set up 4 Open Collector controls (O/C) enabling you to control various external equipment such as curtains, lift, light,
projector screen, projector lift, etc. Limiting values are: 0 to 12 V, 100 mA.
CONTROL TIMER
- Control Timers can be changed in these below sub-menus
CINEMA ON
- CONTROL TIMER 1 can be changed. It defines the time from the user activates a Video source control button (e.g. TV) until Control Timer 1 port is
activated
- CONTROL TIMER 2 can be changed. It defines the time from the user activates a Video source control button (e.g. TV) until Control Timer 2 port is
activated
- CONTROL TIMER 3 can be changed. It defines the time from the user activates a Video source control button (e.g. TV) until Control Timer 3 port is
activated
- CONTROL TIMER 4 can be changed. It defines the time from the user activates a Video source control button (e.g. TV) until cinema control port 4
is activated
- Projector WARM UP TIME can be changed. It defines the time from the user activates a video source control button (e.g. TV) until the SW curtains
are opened in cinema mode (on the projector or a 3rd party TV screen).
Note: The value of this Timer must be equal to or higher than any of the other 4 CINEMA ON timers above.