Extending cables
18
> Continued from previous page
The below description is used when connecting to older televisions and when using the IR cable with optocoupler Part No.: 6271240.
Cut off the Mini Jack 3.5 mm Stereo plug (marked: HDMI Receiver) of the IR cable with Optocoupler (Bang & Olufsen Part No. 6271240; Atlona
Part No. AT-BO-PRO3HD-1MIR).
Strip off the necessary isolation to prepare the wires for being placed in the Captive Screw Connector. Connect the wires according to the colour
indication in the below illustration. When the cable is used with BeoPlay V1, BeoVision 11 and newer TVs the Mini jack to RJ45 Adaptor cable
(Bang & Olufsen Part No. 6271233) is added.
Cable wires in captive screw connectors
With the AT-HDTX-IR and AT-HDRX-IR the cable wires are fastened in captive screw connectors that matches the connectors. This allows for
arranging cables in suitable lengths.
It is important that the wires are terminated correctly. With each connector a contact plate is placed at the top of each hole.
Follow the below instruction steps to ensure correct connection.
- Turn screw clockwise to lower contact bar.
- Insert the wire above the contact.
- Turn screw counter clockwise to raise the contact bar and screw to compress the wire against the contact plate at the top.
PWR
GND
–
IR
+
6271233
6271240
(Bang & Olufsen Part No.: 6271233)
Braided Shield
White
Red
(Bang & Olufsen Part No.: 6271240)