![background image](http://html1.mh-extra.com/html/bang-and-olufsen/beovision-12-65-mk-ii/beovision-12-65-mk-ii_installation-manual_3730928041.webp)
Customer Service Menu
41
SETTINGS
CLOCK
CLOCK ON/OFF: Factory setting is ON. The de-activation of the clock only applies to the HW clock and not if the clock is present via Internet or
DVB.
Missing clock function will make software and PUC update impossible.
CLOCK TIMEOUT
CLOCK TIMEOUT sets the amount of seconds that should pass before the clock is removed from the status display/screen. The default value is 10
seconds.
AUTO ST.BY 15 MIN.
AUTO ST.BY 15 MIN.: When the picture and sound signal for the actual selected device (external sources only) has disappeared for more than 15
minutes, the product will go into the lowest possible power mode, depending on other activities.
The screen and the speakers in the room will be switched off.
If, however, this function reveals some disadvantages, it is here possible to deactivate this feature (OFF). Default setting from factory is ON.
NETWORK LINK PRODUCTS
Is showing a status of the products on network link (changes might be delayed ~1 min). It will be possible to refresh the list or to set not used/
removed products to offline (Products that no longer are present can be deleted manually - to avoid they force wireless mode forever (i.e. not echo
free).
NETWORK DELAY, WIRED/
NETWORK DELAY, WLAN
NETWORK DELAY, WIRED and WLAN. These are settings that will optimise for unwanted echo phenomenons between products linked up in a
system (Network Link and/or Master Link). The system itself will optimise the settings or offer default values. Should these values, however, still
give unwanted echo phenomenons, it will be possible in these settings to adjust the buffer time. Also if e.g. drop-outs in sound might occur, it will
be helpful to raise the delay time. A third possibility is to lower the delay time to optimising the operation response. However, this will be a
compromise between unwanted echoes or quick response. If Power Line Communication technology is used, the NETWORK DELAY, WIRED value
should be increased to avoid drop-outs.
All delay parameters are updated in the menu when changed from another product.
ML DELAY SETTINGS
Recommend value for setting the delay in the ML DELAY BOX to have echo free streaming from TV to ML.
The value of ML DELAY SETTINGS depends on the NETWORK DELAY, WIRED or NETWORK DELAY, WLAN. The NETWORK DELAY, WLAN value is
used if at least one product has been registered as wireless in the system .
Due to the default NETWORK DELAY, WLAN value, i.e. in wireless mode, this value becomes larger than possible to set in the ML DELAY BOX.
About adjustment possibilities, see NETWORK DELAY above.
It is recommended to set up echo free listening in wired mode.