manualshive.com logo in svg

Bang & Olufsen BeoVision 12-65 MK II, Руководство по установке

Поделиться
Скачать
Bang & Olufsen BeoVision 12-65 MK II Скачать руководство пользователя страница 22

Screen measurement - Measure Screen     22

MEASURE SCREEN - sequence

- Select 

MEASURE SCREEN

 and press the 

Centre

 button.

The following is shown:

ROTATE THE DIFFUSER AWAY FROM  
THE LENS BEFORE STARTING AND 
PLACE SENSOR ON THE GREEN
SQUARE NOT OVERLAPPING THE RED
AREA.

ONCE POSITIONED CORRECTLY YOU 
WILL BE ABLE TO PRESS START AND 
INITIATE SCREEN MEASUREMENTS.

Ambient light condition

Perform the screen measurements in lighting conditions as dark as possible to minimise the influence of ambient light.

Warm up sequence

-  If the BeoVision 12-65 has not been switched 

On

 for 5 minutes, a warm up sequence is started, indicated by the following text:

 

A WARM UP SEQUENCE OF 5  
MINUTES WILL BE SHOWN BEFORE  
STARTING ACTUAL MEASUREMENTS.

In the warm up period, the picture will show coloured pixels. When the warm up period is ended continue on next page.

-  If the BeoVision 12-65 has been switched 

On

 for 5 minutes or more continue on next page.

√

X

Содержание BeoVision 12-65 MK II


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды