![background image](http://html1.mh-extra.com/html/bang-and-olufsen/beovision-12-65-mk-ii/beovision-12-65-mk-ii_installation-manual_3730928025.webp)
Screen measurement - Measure sensor step 1 of 4
25
Step 1 of 4
Note: See recommendations regarding ambient light conditions on the previous page.
The recommendations are important to be followed for a succesful measurement as described in the next 4 steps. An error message will be given
at step 4 if conditions are not satisfactory. Then adjust light conditions and redo the measurement.
For this measurement, the measurement device is oriented as seen in the
illustration.
The measurement device is held by hand.
- Press the
Centre
button to continue
The following instructions are shown - follow these (see the illustration):
STEP 1 OF 4:
HOLD/ATTACH THE MEASURING
DEVICE AGAINST THE SCREEN’S
UPPER RIGHT EDGE, POINTING THE
DEVICE UPWARDS
START MEASUREMENT NO. 1
- Press the
Centre
button to start the measurement.
During the measurement the text
MEASURING
is shown.
When the measurement is finished, continue with step 2.