![background image](http://html1.mh-extra.com/html/bang-and-olufsen/beovision-12-65-mk-ii/beovision-12-65-mk-ii_installation-manual_3730928019.webp)
Shortening IR-blaster cables - PUC cables 19
Shortening IR-blaster cables - PUC cables
The IR-blaster cable enclosed for PUC control with the products is often too long. It is good installation practice to shorten cables to get rid of
excessive cable.
IR blaster cable with 1 IR blaster has Bang & Olufsen Part No. 6271234, marked with PUC A.
IR blaster cable with 2 IR blaster has Bang & Olufsen Part No. 6271204, marked with PUC A and PUC B for the two blasters respectively.
- Cut the cable in an appropriate length.
- Observe the text printed on the anode wire of the IR blaster cable.
- Observe the labelling of the cable (PUC A or PUC B) and arrange the two wires
according to the illustration in a new RJ45 plug.
- Crimp the wires into the RJ45 plug.
1
8
8
7
6
5
PUC A
PUC B
Text Text Text Text
Text T
ext
Text
Te
xt
Tex
t
Te
xt Text Text Text Te
xt T
ext T
ext
Tex
t T
ext
T
ex