Technical data
Order number
5DLSDL.1001-00
Operating conditions
Pollution degree per EN 61131-2
Pollution degree 2
Mechanical properties
Dimensions
Width
190 mm
Height
110 mm
Depth
23.6 mm
Weight
538 g
1)
The brightness controls can be used to set the brightness of the backlight on the Automation Panel in DVI operation.
2)
Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.
3)
The following Automation Panel link module interfaces are not approved for use in DNV GL ambient conditions: COM, USB.
4)
Yes, but applies only if all components installed in the complete system have this certification and are listed on the associated DNV GL certificate for the
product family.
5)
Max. USB 1.1 is possible in "SDL operation without USB cable".
6)
For the 2 USB type A female connectors.
7)
EN 60950 requirements must be observed; see section "+24 VDC power supply" of the user's manual.
Automation Panel 1000 - Hygienic design user's manual V2.00
51
