Installation and wiring
•
The device is only permitted to be operated in closed rooms and not permitted to be exposed to direct
sunlight.
•
The climatic and ambient conditions must be taken into account –
see "Environmental properties" on page
.
General installation instructions
•
Inclined installation reduces the air convection through the device and thus the maximum permissible am-
bient temperature for operation. If there is sufficient external ventilation in an inclined mounting orientation,
the maximum permissible ambient temperature must be checked in each individual case. Failure to do so
may result in damage to the equipment and void the certifications and warranty for the device.
•
When installing the device, the permissible mounting orientations must be observed -
•
The device must be installed in such a way that it can be optimally viewed by the user.
•
The device must be installed in such a way that reflections on the screen are avoided as far as possible.
•
When installed in a closed housing, there must be sufficient volume for air circulation -
•
When connecting installed or connected peripherals, follow the instructions in the peripheral device's doc-
umentation.
Information about leak tightness
Warning!
Failure to follow instructions can result in damage to property.
•
The gasket must be inspected before installation or reinstallation and at regular intervals according to the
requirements of the operating environment.
•
Replace the entire device if inspection reveals visible scratches, cracks, dirt deposits or excessive wear.
•
Do not stretch the gasket unnecessarily.
•
It is important to ensure that the gasket is correctly seated all around.
Transport and storage
When transporting at low temperatures or in the event of large temperature fluctuations, the collection of moisture
in or on the device is not permitted. Moisture can cause short circuits in electrical circuits and damage the device.
If a device is transported or stored without packaging, all environmental influences such as shocks, vibrations,
pressure and moisture have an unprotected effect on the device. Damaged packaging indicates that the device
has been severely affected by environmental influences and may have been damaged.
This can result in malfunctions of the device, machine or system.
Use of third-party products
If third-party devices or components are used, the relevant manufacturer's documentation must be observed. If lim-
itations or interactions by or with third-party products are possible, this must be taken into account in the application.
Automation Panel 1000 - Hygienic design user's manual V2.00
57
