26 / 33
51826-001 en/2023-01
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
5
Cleaning and maintenance of the ultrasonic homogeniser
To achieve an optimum lifespan for the ultrasonic homogeniser, cleaning and maintenance
must be conducted regularly.
CAUTION!
Always disconnect the ultrasonic homogeniser from the mains before performing
cleaning / maintenance.
Do not rinse or immerse the ultrasonic homogeniser in water and do not expose it to splash water.
5.1
Cleaning and care
The cleaning and disinfection, if needed, must be carried out regularly by the user with
a suitable cleaning agent and a lint-free cloth.
In most cases, a cloth soaked in alcohol is su
ffi
cient to wipe o
ff
the probe.
Ultrasonic converter/ ultrasound generator
• Do not use abrasive cleaners, only use commercially-available care products without
scouring agents.
•
Wipe the housing only from the outside with a moist cloth; if needed, use a suitable surface
disinfectant, then allow to dry or rub dry.
5.2
Warehousing / storage
During extended periods without use, the ultrasonic homogeniser should be stored in a cool,
dry place. The ultrasonic converter should be covered in order to protect the electronics from
outside contamination.
