11 / 33
51826-001 en/2023-01
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
b) RS 232 interface
The RS 232 interface connection is located on the rear side of the ultrasound generator.
A standard serial conductor (RS 232) can be used for connection and communication
purposes. Implementation of the technical programs required for communication
is the responsibility of the operator and is not supported by the manufacturer.
The manufacturer only guarantees the proper functioning of the interface.
The instruction set for the RS-232 interface will be made available by the manufacturer free
of charge, upon request.
Note:
Proper operation will depend on the length of the connection cable. If an extension is used,
a length of 5 m may not be exceeded.
Caution!
The inputs and outputs of the remote control connector and RS-232 interface may only be
connected with devices of protection class I that are connected to the same mains supply circuit.
