Balluff BVS ID-M1280 F1 Series, Руководство по настройке, Страница: 270 / 316

BVS ID-M1280xF1-xx-xxx
112 english
Location Tag
With the Location Tag parameter, a string (maximum 32 bytes) can be written to the device. This value typically
describes the location of the product in the application area.
Product Type Code
The Balluff type code is stored permanently in the BVS ID .
Product Order Code
The Balluff order code is stored permanently in the BVS ID .
Product Licenses
Shows the current available licenses in the BVS ID , e.g. "BVS Base, BVS Ident" .
System Commands
For an overview of all System Commands see chapter "System Commands".
Variant Dependence
The functionality is available in all variants.
4.4.8.2 Device Discovery
Description
With the Device Discovery function, an IO-Link device can be found again by starting signaling on the LED of the
device by means of a system command.
ISDU
Name Index
Subinde
x
Acces
s
Length Data Type
Data
Storage
Default
Device Discovery
Timeout
0x00FE
(254)
0 R/W 2 bytes UINT16 Yes 1
Device Discovery Timeout
The Device Discovery Timeout parameter sets the duration of the Device Discovery signal that is displayed via
LEDs. The value is specified minutes. The value range from 0 to 30 minutes is allowed. If the parameter is set to
0, the Device Discovery signal is deactivated. The parameter is reset by Application Reset and Factory Reset,
see chapter "Reset Commands".
System Commands
Command Value Device Action
0xAF (175) Start Device Discovery