Balluff BVS HS-Q Series, Руководство по эксплуатации

Страница: 171 / 296

171
www.balluff.com
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
MSI Set Length 1
This feature specifies one of the barcode lengths for MSI Length Control on page 170 . Length 1 is
the minimum label length if in Variable Length: For variable length decoding, a minimum and
maximum length may be set. on page 231 Mode, or the first fixed length if in Fixed Length: For
fixed length decoding, two different lengths may be set. on page 231 Mode. Length includes the
barcode’s data characters only. The length can be set from 01 to 50 characters.
Table MSI Length 1 Setting Examples provides some examples for setting Length 1. See
page 232 for detailed instructions on setting this feature.
MSI Length 1
Setting
Examples
STEP ACTION EXAMPLES
1 Desired Setting
01 Charac-
ters
07 Charac-
ters
15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT MSI LENGTH 1 SETTING
4
Scan Two
Characters From
Appendix 18, Use
the barcodes in
this appendix to
enter numbers as
you would select
digits/characters
from a keypad.
‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select MSI Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You can
then start again at the beginning.
CANCEL
$CMSL1
~
DEFAULT
01 = Length 1 is 1 Character