Balluff BVS HS-Q Series, Руководство по эксплуатации

Страница: 121 / 296

121
www.balluff.com
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
Code 128 Set Length 1
Specifies one of the barcode lengths for Code 128 Length Control on page 120 . Length 1 is the
minimum label length if in Variable Length: For variable length decoding, a minimum and maxi-
mum length may be set. on page 231 Mode, or the first fixed length if in Fixed Length: For fixed
length decoding, two different lengths may be set. on page 231 Mode. Length includes the bar-
code’s data characters only. The length can be set from 1 to 80 characters.
Table Code 128 Length 1 Setting Examples provides some examples for setting Length 1. See
page 232 for detailed instructions on setting this feature.
Code 128 Length
1 Setting
Examples
STEP ACTION EXAMPLES
1 Desired Setting 01 Character 07 Characters 15 Characters 80 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 128 LENGTH 1 SETTING
4
Scan Two
Characters
From
Appendix
18, Use the
barcodes in this
appendix to
enter numbers as
you would select
digits/characters
from a keypad.
‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘8’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Code 128 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You can
then start again at the beginning.
CANCEL
$CC8L1
~
DEFAULT
01 = Length 1 is 1 Character