How to View or Change an Input Channel setting
1.
Insert the key and rotate clockwise.
The display will show the software version, in this example 08.20.
------------------------------------------
| BVR 20 VOICE ALARM Version 08.20 06.09 |
| BALDWIN BOXALL COMMUNICATIONS |
------------------------------------------
2.
Press the Page down key.
The display warns you that you have accessed the set up program.
------------------------------------------
| *****************WARNING**************** |
| YOU HAVE ACCESSED THE SET UP PROGRAM ! |
------------------------------------------
3.
Press the Page down key again.
The display invites you to enter an output channel number 1-31 that you wish to set up.
------------------------------------------
| OUT 00 VOLUME & EQUALISER SETTINGS |
| Enter output no required Press page down |
------------------------------------------
4.
Press the Page down key again.
The display invites you to enter an input channel number 1-20 that you wish to set up.
------------------------------------------
| IN 00 VOLUME & EQUALISER SETTINGS |
| Enter input no required Press page down |
------------------------------------------
5.
Enter the input channels number required using the numbered keys. (If you are selecting an input
channel between 1 and 9, please remember to include a 0 before the output channel number, i.e.
‘08’)
------------------------------------------
| IN 08 VOLUME & EQUALISER SETTINGS |
| Enter input no required Press page down |
------------------------------------------
6.
Press the Page down key again.
The display will step to the 1
st
page, current volume and equaliser setting of input channel 8
------------------------------------------
| IN 08|VOL|HP|BASS|600|1K0|2K5|TREB|MODE |
| | 00|00| +12|-12|+06|-06|+12 | 00 |
------------------------------------------
To adjust the volume. Ensure the cursor is flashing beneath the VOL window. Values between 0-9
may be entered directly using the numbered keys, note the cursor automatically steps to the HP
window. Or using the + or – keys will increase or decrease the value between 00 (minimum -12db)
and 15 (maximum 0dB).
To adjust the 200Hz high pass filter. Move the cursor along until it flashes beneath the HP setting.
Values between 0-9 may be entered directly using the numbered keys, note the cursor
automatically steps to the BASS window. Or using the + or – keys will increase or decrease the
value between 00 (filter in, 12dB/oct) and 15 (filter out).
