background image

ranging levels.

 ------------------------------------------
| IN  08|ATTENUATOR|   COMPRESSOR   |CHIME |
|       |.00|....00|Off             |Off   |
 ------------------------------------------

 

To select either limiter or compressor, move the cursor until it flashes beneath the above window.
If no limiter or compressor is required, press 0, the display will indicate Off.

If a limiter action is required, press 1. The display will respond thus.

 ------------------------------------------
| IN  08|ATTENUATOR|   COMPRESSOR   |CHIME |
|       |.00|....00|Limiter  00|Fast|Off   |
 ------------------------------------------

If a compressor action is required, press 2. The display will respond thus.

 ------------------------------------------
| IN  08|ATTENUATOR|   COMPRESSOR   |CHIME |
|       |.00|....00|Compress 00|Fast|Off   |
 ------------------------------------------

The threshold is adjusted by moving the cursor along until it flashes beneath the above window.
Values between 0-9 may be entered directly using the numbered keys. Note the cursor
automatically steps to the next window. Or using the + or – keys will increase or decrease the
value between 00 (High threshold) and 15 (Low threshold).

 ------------------------------------------
| IN  08|ATTENUATOR|   COMPRESSOR   |CHIME |
|       |.00|....00|Limiter  06|Fast|Off   |
 ------------------------------------------

        

The release time may be either set Fast, ideal for speech or Slow, suitable for music by moving the
cursor beneath the above window. Press 0 to select Fast release, or 1 to select Slow release.

A 1,2 or 3 note chime may be selected to proceed a live announcement.
Move the cursor along until it flashes beneath the chime window.
Press 0 if no chime is required. Press 1 for 1 note. Press 2 for 2 notes. Press 3 for 3 notes.

 ------------------------------------------
| IN  08|ATTENUATOR|   COMPRESSOR   |CHIME |
|       |.00|....00|Limiter  06|Fast|3note |
 ------------------------------------------

Pressing Page up key enables you to step to the previous page.
Pressing Page down key steps to the next page, in this example Input 09 page 1.

 ------------------------------------------
| IN  09|VOL|HP|BASS|600|1K0|2K5|TREB|MODE |
|       | 00|00| +12|-12|+06|-06|+12 | 00  |
 ------------------------------------------

Note: Once settings have been adjusted, always return the key to the anti clockwise position to
prevent accidental adjustment.

Содержание Microdrive





















Отзывы: