loudspeaker level follows the ambient noise.
In theory, if the ambient noise is at its loudest, the announcements should remain around 10dB
above the ambient level. The sensitivity is adjustable from 01 and 15. Once set, the loudspeaker
volume will automatically adjust to the ambient noise in that zone, from maximum and 20dB
below maximum. Therefore if the sensor does not sense a signal, the output will be 20dB below
the maximum setting.
Pressing the Page up key enables you to step to the previous page
Pressing the Page down key enables you to step to the next page, in this example Output 2 page 1
------------------------------------------
| OUT 02 in|01|02|03|04|05|06|07|08|09|10 |
| volume|00|00|00|00|00|00|00|00|00|00 |
------------------------------------------
Note: Once settings have been adjusted, always return the key to the anti clockwise position to
prevent accidental adjustment.
