24.
Press the Page down key again.
The display steps to the 1
st
page fire microphone 02 monitored access selection for outputs 01-10.
------------------------------------------
| F/M 02 out|01|02|03|04|05|06|07|08|09|10 |
| access in|00|00|00|00|00|00|00|00|00|00 |
------------------------------------------
Repeat 23 onwards for all 4 fire microphones.
25.
Press the Page down key again.
The display steps to the 1
st
page, page microphone 01 unmonitored access selection for outputs 01-
10.
------------------------------------------
| P/M 01 out|01|02|03|04|05|06|07|08|09|10 |
| access in|10|10|10|10|10|00|00|00|00|00 |
------------------------------------------
Any of the 54 access control inputs available on the 3 BVRCI termination modules may be
programmed to route any of the 23 input sources to any of the 20 outputs when the control input is
closed to 0V.
In the example above, if input access 10 were closed to 0V page microphone 01 would be
broadcast to outputs 01-05 and outputs 06-10 would be silent.
Note: Inputs 1-8 on the 1
st
BVRCI are used for page microphones 1-8 press to speak access.
Inputs 1-8 (19-26) on the 2
nd
BVRCI are used for ambient noise sensors outputs 1-8 and inputs 1-8
(37-44) on the 3
rd
BVRCI are used for ambient noise sensors outputs 9-16.
If not required any of the above inputs may be programmed to provide access to any of the audio
channels.
To change the access input, move the cursor along until it flashes beneath the required output 1-10
window.
If the access input required is between 0-9, enter it directly using the numbered keys, or using the
+ or – keys step to the number required between 00 and 54.
26.
Press the Page down key again.
The display steps to the 2
nd
page, page microphone 01 unmonitored access selection for outputs
11-20.
------------------------------------------
| P/M 01 out|11|12|13|14|15|16|17|18|19|20 |
| access in|00|00|00|00|00|00|00|00|00|00 |
------------------------------------------
To change the access input, move the cursor along until it flashes beneath the required output 1-10
window.
If the access input required is between 0-9, enter it directly using the numbered keys, or using the
+ or – keys step to the number required between 00 and 54.
27.
Press the Page down key again.
The display steps to the 1
st
page, page microphone 02 unmonitored access selection for outputs 01-
10.
------------------------------------------
| P/M 02 out|01|02|03|04|05|06|07|08|09|10 |
| access in|00|00|00|00|00|00|00|00|00|00 |
------------------------------------------
Repeat 25 onwards for all 8 page microphones.
