Baldor NXE100-1608Dx, Руководство по установке

Страница: 58 / 114

www.baldormotion.com
5-8 Operation MN1941
5.3.2 Viewing remote nodes connected over Ethernet (optional)
When a remote node such as MicroFlex e 100 is connected to the NextMove e 100 using Ethernet,
it is possible to view the connection in MMC. The PC is able to connect to the remote node, even
though the PC only has a physical USB connection to the NextMove
e 100. This feature is known
as ‘redirection’, and simplifies configuration of multiple controllers on an Ethernet / EPL network.
For the following procedure, it is essential that the NextMove e 100’s node ID selector switches
are not set to F0. Although F0 is the correct node ID to make the NextMove e 100 an EPL manager
node, the remote nodes have not yet been configured for EPL operation so will be ignored if the
NextMove
e 100 is operating as a manager node. In this example, communications will use
standard Ethernet, not EPL.
1. In the controller pane, ensure that Host is
selected. In the information pane, click
Scan.
2. When the search is complete, click once
on the ‘Ethernet’ entry underneath the
‘NextMove
e 100’ entry.
3. In the information pane, select the Scan
for single node option.
Enter the remote node’s node ID in the
adjoining box.
Click Refresh .
4. In the controller pane, the remote node
should now be displayed on the
NextMove e 100’s Ethernet connection.