Baker Hughes Panametrics oxy.IQ, Руководство пользователя

Страница: 34 / 56

Appendix A. Outline and Installation Drawings
26 oxy.IQ User’s Manual
Figure 12: Cable, IS (ref. dwg. 704-1318, SH 1 of 2)
Notes:
1. Interpet drawing in accordance with ASME Y14.5(M)-2009
2. Finished components to be ROHS compliant
3. Part to be clean of dirt/debris
4. Performance specification
Rated current 2.0 A
Rated voltage 24 VDC
Operating temperature range -25 C TO 85 C
Protection class meets NEMA type 1,3,4,6P and IEC IP67
Retention 6.75 lbs. min. perpendicular & normal
5. Cable assembly shall be tested 100% for continuity and shorts.
Hirose solder & back shell tightening fixture shown on sheet 2.
6. Inspection requirements:
All CTQs (1-11) identified & notes are to be reported on the FAI & meet AQL .65 level II per lot
Specific CTQs identified below are to have a CpK no less than 1.33:
1,2,4
Specific CTQs identified below are to have a Cp no less than 1.33:
@LSL none @USL - none
Attribute data to meet 4 Sigma (0.63% DPMO) identified below:
None
.25±.03
XX
1.16
1.00±.25
A A
Blue
Brown
1
2
3
1
2
4
3
.49
Indicator arrow
1.00
3
Cable length
End “A” End “B”
4
5
Heat shrink
with adhesive backing
XX-cable length
Part number
extension
2 meters -0/.1 (6.56ft -0/+.33) 02
10 meters -0/.5 (32.81ft -0/+1.58) 10